Your shopping cart is empty.

Ph. +61 2 6931 8252

BitScope LP103W Mixed Signal Logic Probe

*All prices exclude GST if applicable

Mixed Signal Logic Probe

The LP103W is a general purpose 10 channel mixed signal logic probe compatible with all BitScopes.

It is a good choice for non-SMT mixed signal work and is supplied with a set of 10 mini-hook test clips providing robust connectivity to thru-hole components, wires and test points.

Logic inputs are uni-polar high speed CMOS compatible with 3.3V and 5V logic levels or standard TTL logic levels. Analog inputs are bipolar 100K/5pF rated to ±12V

Feature Specification
Bandwidth DC to 50MHz
Logic Channels 8
Analog Channels 2
Rise Time 10nS (typical)
Input Resistance 100KΩ
Input Capacitance 5pF (typical)
Maximum Input Voltage [1] 12V DC
Logic Working Voltage [2] 3.3, 5V CMOS & TTL
Analog Working Voltage [2] ±10mV to 5V
Output Power Voltages [3] 5V & 9V~12V
Logic and Power LEDs [4] YES
[1] This voltage must not be exceeded at the POD input connector.
[2] Direct connection voltage ranges. These may be increased with series resistor. For example, a 100K series resistor will double the voltage range and switching points.
[3] A 5V power supply rail is provided at the POD connector. An optional 9V or 12V supply may also be available (depends on BitScope model to which it is connected). These may be used to supply low powered external circuits to which LP103W is connected.
[4] The POD connector includes LEDs to indicate power availability and logic level on the first logic channel (independently of BitScope).


See also: BS05U and BS10U

Order Online

Bitscope Extra Test Clips

Order Online

Bitscope Mixed Signal Logic Probe Adaptor Leads

Order Online

Bitscope 60 MHz, 10:1 Probe

Order Online

Bitscope 100 MHz 10:1 Probe